For Hotels, Office complexes, Cubicles, etc.        UL # E165176

SAVES AT LEAST 5 MINUTES PER BOX PLUS LESS LABOR AND MATERIAL REQUIRED. ONE BRACKET REPLACES TWO TO MOUNT BOXES BACK TO BACK ON COMMON WALLS.

• Mount up to three 4" or 4 11/16" square deep boxes facing opposite direction in 16" and four in 24 inch stud spacing. For shallow boxes use deeper mud ring.
• 3/32" pilot holes centered every 1/2 inch along entire width allow fast, accurate installation of boxes at exact same height and atlocation desired either in shop or on jobsite. Use # 8 x 1/2" or 3/4" long pan head screws to securely mount boxes.
• Bracket is notched at each end for fast accurate centering of boxes at proper height above the deck.
• Extra wide wings with three 1/4 inch pilot holes on each side allow bracket to be shifted approx. 1/2 inch left or right to provide secure installation if studs are not  exactly 16 and 24 inch on center.
• Bracket allows clearance of ground screw when boxes are rotated and mounted in any position.
• We suggest boxes be mounted with the ground screw opening toward the bottom.

UL Listed as a complete unit with any configuration of UL Listed prefabricated assemblies installed.

ALSO IDEAL FOR...

Mounting boxes back to backvertically for bedroom and bathroom wall switches, thermostats
and other applications. Or Conduit Supports...

Go Back to Innovative Products Main Page